Buy COAST PM200 SERIES MAGNETIC WORK LIGHT
Specification
Product Features
Heavy duty housing
Adjustable stand and head
Foucsing twist bezel
Three lighting levels
Operational Modes
High: 500 lumens; 7 hours, 30 minutes run-time; 195 m beam range
Mid: 180 lumens; 17 hours run-time; 118 m beam range
Low: 59 lumens; 50 hours run-time; 66 m beam range
Tested to FL1 standards using 3 x AA alkaline batteries.
Technical Details
Type: LED work light
Operating Modes: High / Mid / Low
Luminous Flux: Up to 500 lumens
LED: White LED
Focus: Spot to flood
Battery Required: 3 x AA alkaline (included) or Zithion-X battery pack
Dimensions: 136.8 x 70 x 32.5 mm
Weight: 271 g (including batteries)
Switch Type: Single power button
Environmental: Dust and water resistant to IP54 standard
Warranty: 5 years
Regulatory Compliance: CE / RoHS
Packaging and Contents
Supplied in retail packaging and includes:
Coast PM200 work light x 1
AA alkaline battery x 3
Manual x 1
Coast PM200 Magnetic Focusing Work Light 500 Lumens 360
Degree Arc Sleek FrameItem description | Price per of |
---|---|
1+ |
£25.01 |
Total price £25.01
Product Detail
The PM200 is one of the torches in Coast's new range of work lights and is powered by three AA alkaline batteries to provide a high output of 500 lumens from a single white LED.
What sets this apart from other work lights is that it has the ability to focus the beam using Coast's Pure Beam Focusing Optic System to focus between the bulls-eye spot beam with a range of up to 195 metres, and the ultra view flood beam that gives a consistent circle of light with no dark circles in the middle. Changing between spot to flood is achieved by twisting the bezel of the light back and forth.
For versatility the lamp can be attached to magnetic surfaces with the strong magnet that is built into the base of the handle, or the handle can be rotated around the main body 360° to be used as a stand or a hanging hook. In addition the position of the lamp head can be rotated 270° to acheive the best light coverage.
The light is operated using the power button located on the front and each press will cycle through mid, high and low, but after being in a mode longer than 5 seconds the next press will instead turn the light off. Mid output will always be accessed first to give a good initial output that is not too bright or too low.
Dual power options means that the light can use 3 x AA alkaline batteries (included) or it can also use a Coast Zithium-X battery pack (which is not included with this version but does come included with the alternate PM200R rechargeable option also available on the website).
The PM200 is dust and water resistant to IP54 standards, making it perfect for a variety of outdoor activities.